Plasterer Dublin - Expert Plastering Service

Plastering costs can vary depending on the job type, surface condition, and finish required, but here’s a general guide for Irish homeowners:

Typical Plastering Costs (Labour + Materials):

• Standard skimming (per m²): €10–€20
• Full room reskim (walls only): €400–€800
• Ceiling skim (per room): €200–€400
• New plasterboard & skim (per m²): €25–€40
• Repairs / Patchwork: €100–€300 per area (depending on severity)
• Full house plastering: €4,000–€10,000+ depending on size & prep

All pricing includes surface prep, materials, and clean-up. For accurate estimates, we recommend a free on-site assessment, especially if you’ve got old plaster, damp issues, or mixed surfaces.

Here’s a rough timeline to help you plan:

• Single wall or patch repair: 2–5 hours
• 1 Room (walls only): 1–2 days
• 1 Room (walls + ceiling): 2–3 days
• Full 3-bed house (skim over existing): 7–10 working days
• New build or extension (with plasterboard install): 10–14+ days

We allow proper drying and curing time—especially in colder or damp-prone rooms. A freshly skimmed wall usually needs 5–7 days to dry fully before painting. We’ll let you know when it’s safe to decorate.

Short answer—it depends. Here’s the breakdown:

Over paint:

• Yes, but the paint must be sound, clean, and well-adhered. Gloss or flaky paint will need sanding, bonding agents, or PVA primer for proper adhesion.

Over wallpaper:

• Nope—not recommended. Wallpaper must be fully removed, along with any residual glue. Plastering over wallpaper can lead to delamination, cracking, and wasted money.

If you’re not sure what’s on your walls, we’ll assess it during the site visit. We always prioritise proper prep to avoid future headaches.

We do both, depending on the condition of your walls and the project requirements:

Skimming (Thin Coat Finish):

• Ideal for smoothing existing walls with minor imperfections
• Typically 2–3mm of finishing plaster
• Leaves a smooth surface ready for paint or wallpaper
• Faster and less invasive for already plastered homes

Plasterboard + Skim (Drylining):

• Used when walls are damaged, uneven, or unplastered
• Offers better insulation (especially with thermal boards)
• Required for new builds, extensions, or renovations with bare block
• Can also be dot-and-dabbed or screwed to battens

We’ll recommend the right approach for your property and budget. Whether you’re doing a light refresh or a full renovation, we’ve got the tools and techniques to deliver a clean, durable finish.